Midland's Leading Expert Foundation Repair, Concrete Repair & Concrete Leveling Contractor

A concerned homeowner in Midland, Texas, reached out to us after noticing that the concrete around their flowerbed was lifting and they suspected the presence of cracks in the brick foundation. Experiencing such issues can be worrying, as they may indicate underlying structural problems and could potentially affect the home’s integrity. Upon contacting Legacy Supportworks, the homeowner was promptly assisted by our Customer Care Specialist, who scheduled a detailed home inspection. Our System Design Specialist then visited the site, conducted a comprehensive inspection, and identified soil erosion under the concrete slab and foundation as the primary culprits. A tailored solution involving our PolyLevel, NexusPro, and Push Pier systems was proposed to effectively address these issues. Our skilled production team first used the PolyLevel system to stabilize, lift, and evenly level the affected concrete slabs by injecting a high-strength polyurethane foam beneath them. This reliably eliminated any voids and restored the slabs to their proper alignment. Simultaneously, NexusPro Joint Sealant was applied to seal any visible cracks and joints, preventing water infiltration that could further compromise the soil beneath and exacerbate foundation problems. To ensure a long-lasting solution, the Push Pier System was implemented to permanently stabilize the settling foundation. By driving engineered steel tube sections to competent load-bearing soil, we mitigated future settlement risks and improved the overall stability of the structure. Upon completion, the property’s external appearance and foundational stability were restored to the homeowner’s satisfaction. This successful intervention not only enhanced the home's safety and integrity but also significantly improved the homeowner’s peace of mind—hallmarks of the exceptional service and enduring solutions that Legacy Supportworks is committed to delivering.

In Midland, TX, a homeowner faced a common but troubling problem: every time it rained, their basement flooded. Despite multiple cleanup efforts, they couldn’t determine the source of the leak. Concerned about water damage and the potential decline in property value, they reached out to us at Legacy Supportworks. Our process kicked off when a Customer Care Specialist scheduled an inspection. A System Design Specialist visited the homeowner, performing a comprehensive assessment to pinpoint the origination of water ingress. After analyzing the basement, our expert recommended a tailored solution that included CleanSpace, WaterGuard, and SuperSump installations. The CleanSpace encapsulation system, purpose-built for controlling basement moisture, laid the first line of defense. Serving as a robust barrier, CleanSpace efficiently blocked out moisture that often results in mold growth, wooden rot, and associated issues. Paired with this, the WaterGuard drainage system was tactically positioned below the basement floor to intercept and redirect any seepage into the SuperSump, our high-capacity sump pump system. Together, these components formed a seamless flow of protection—ensuring that any water breaching the walls would never accumulate on the floor. Our skilled production team executed the installation with precision, creating a comprehensive shield against future leaks. By the time our crew departed, the basement was transformed into a dry, worry-free space. The WaterGuard was discretely set beneath a fresh concrete layer, making signs of intervention nearly invisible. With these solutions, the homeowner no longer feared the forecast, assured of a basement free from unexpected water problems, increased property safety, and long-term peace of mind. At Legacy Supportworks, we deliver not just results, but a reliable partnership for home preservation.

In Midland, TX, a homeowner faced a persistent challenge. Their home's structure was showing signs of distress, evident through cracking tiles, misaligned doors and windows, and a visibly cracked driveway. Furthermore, the exterior wall cracks confirmed potential slab movement, raising more concerns about their home's stability. Recognizing the severity, they reached out to our Customer Care Specialist at Legacy Supportworks. Understanding their urgency, we swiftly scheduled a comprehensive home inspection. Our System Design Specialist visited the property, analyzed the structural issues, and meticulously diagnosed the problem. It was identified that the home's foundation required stabilization and lift to restore its integrity. To resolve these issues, our expert team proposed using the PolyLevel® system along with Push Piers. The production team, led by experienced foremen, initiated the solution by injecting the PolyLevel® high-strength polyurethane foam beneath the concrete slabs. This approach not only stabilized the areas in question but also lifted the concrete to a uniform level as the foam expanded and cured, eliminating voids that had caused the slabs to settle unevenly. Subsequently, we installed the Push Pier System to address the home's settling foundation. These engineered steel piers were strategically driven through unstable soils to reach load-bearing strata, stabilizing the foundation and curbing further settlement. As a result, many visible cracks diminished significantly, and the function of doors and windows improved notably. By entrusting their issues to Legacy Supportworks, the homeowner experienced a renewed sense of confidence in their property. The structural integrity was restored, enhancing their quality of life and preserving the value of their home.

In Midland, TX, a homeowner faced a challenging situation: their house was settling, causing unsettling cracks in the sheetrock and noticeably unleveled floors. Concerned about the long-term implications, they reached out to us at Legacy Supportworks, where our mission is to provide a remarkable customer experience coupled with a durable solution to home-related issues. The process began with our Customer Care Specialist scheduling an inspection. Our System Design Specialist then visited the home, conducting a comprehensive review and diagnosing the problem at hand. Given the nature of the issue, the SmartJack® System was recommended as the optimal solution. Our production team, including an experienced foreman and skilled installers, implemented the plan efficiently. The SmartJack® System is crafted to stabilize crawl space beams and floor joists. During the installation, galvanized steel columns were precisely cut and positioned on a 12-inch steel base. These legs were then secured to the existing girders with adjustable top brackets to address the weak foundation soils successfully. This setup not only helped lift the sagging floors towards their original positions but also minimized the flooring "bounce." By the time our team completed the task, the home’s structural integrity had been noticeably improved. The crawl space was now sturdy, providing peace of mind to the homeowner with reduced settling and eliminated cracks in the sheetrock. We left the site clean and orderly, emphasizing our commitment to thoroughness and professionalism. This project exemplifies our dedication to delivering solutions that endure, affirming why homeowners like those in Midland, TX, trust Legacy Supportworks for their home contracting needs.

In Midland, TX, a concerned homeowner reached out to us at Legacy Supportworks after experiencing water seepage in her basement due to recent heavy rains. She wanted a solution that would effectively address this persistent issue and protect her home from potential water damage. After contacting our Customer Care Specialist, an inspection appointment was scheduled. Our expert System Design Specialist conducted a thorough inspection, diagnosing the problem areas and determining the need for an integrated waterproofing system. The specialist proposed a combination of the WaterGuard drainage system, the SuperSump, and CleanSpace encapsulation as the best long-term solution. Beginning the installation, our experienced production team placed the WaterGuard sub-floor perimeter drainage system. This system discreetly captures water seepage from the walls and directs it towards the sump pump, ensuring a clean and dry basement space. Next, we installed the SuperSump, a reliable pressure relief system featuring a top-rated Zoeller pump, designed to efficiently expel water from the basement. Finally, we encapsulated the area using the CleanSpace liner, which provides a durable moisture barrier to prevent any further water-related issues. The outcome was a significantly transformed basement, now protected from water intrusion, offering reassurance and added value to the homeowner. Thanks to our dedicated approach and effective solutions, we're able to help homeowners like this one maintain a safe and dry environment, ensuring peace of mind and a permanent solution to their basement waterproofing needs.

A homeowner in Midland, TX, recently encountered a common yet concerning issue—uneven floors in their residence. The situation had been progressively worsening, leading to significant worry as it began to affect not only the house's structural integrity but also the family's peace of mind. Unsure of how to address the growing problem effectively, the homeowner opted to reach out to Legacy Supportworks for expert assistance. Upon contacting our Customer Care Specialist, a prompt home inspection was scheduled. Our trusted System Design Specialist conducted a thorough assessment of the crawl space, identifying destabilized beams and weakened floor joists as the core causes of the homeowner's troubles. It was evident that a robust and permanent solution was necessary. Our proposed solution was clear: we recommended the SmartJack® System. Selected for its effectiveness in addressing and stabilizing crawl space issues, this system is designed to create a solid foundation for load distribution. By utilizing galvanized steel columns and an engineered fill base, SmartJack® endeavors to restore the home's structural balance. This sophisticated system not only corrected the sagging and bouncing of floors but also adjusted them back toward their original elevation. On the day of the installation, our skilled production team, comprising both a foreman and experienced installers, undertook the correction with precision and care. Each SmartJack® unit was meticulously cut to size and installed, securing the necessary support and alleviating the stress placed on the home's existing structure. Upon completion, the homeowner's confidence and comfort were restored. Floors were no longer uneven—rifling both the aesthetic appeal and safety of their living space, successfully achieved by Legacy Supportworks' approach and expertise in crawl space repair.

A homeowner in Midland, TX recently contacted Legacy Supportworks concerning a widening gap between the driveway slab and the adjoining concrete surface. Recognizing the risks posed, such as uneven surfaces and potential foundational issues, the homeowner sought a durable and effective solution. At Legacy Supportworks, our approach begins with a seamless transition from concern to resolution. Our Customer Care Specialist promptly scheduled an inspection visit, sending our experienced System Design Specialist to assess the situation. A comprehensive examination revealed that soil erosion beneath the driveway slab had caused settlement, resulting in the gap that troubled the homeowner. We assured them that our PolyLevel® system could restore their driveway efficiently and with precision. Our adept production team, equipped with a foreman and skilled installers, set out for the home, ready to provide a lasting fix. Utilizing the PolyLevel® system, they began by drilling small, pea-sized holes into the slab at strategic locations. Through these openings, high-strength polyurethane foam was injected beneath the slab, filling the void and strategically lifting the concrete back into its original, level position. The innovative nature of the PolyLevel® method ensured minimal disruption to the driveway. Upon completing the installation, our team meticulously ensured that the drill sites were clean and discreet, giving due regard to the homeowner’s property. The concrete was not only stabilized but also realigned, offering a smooth and even surface‌. Through this intervention, the homeowner regained peace of mind, a stable driveway, and safeguarding against future issues. Our commitment at Legacy Supportworks remains to deliver a remarkable customer experience, backed by reliable and enduring solutions.

In Midland, TX, a homeowner noticed alarming signs of foundation issues, including cracking in walls and ceilings, sticking doors and windows, and concerning cracks in their brick exterior. Compounding the problems were previous plumbing leaks and the stress of several small earthquakes, further jeopardizing the integrity of their home. Understanding the potential risks, they reached out to Legacy Supportworks with a desire for a lasting solution. Once contacted, our dedicated Customer Care Specialist swiftly scheduled a home inspection. During the appointment, our expert System Design Specialist thoroughly evaluated the homeowner's concerns and diagnosed the underlying issues of foundation settlement. The recommended strategy was to employ our highly regarded Push Pier System. On the day of installation, our skilled production team arrived ready to address the home's challenges. The foreman led the effort, anchored by a team of attentive installers. We commenced by precisely attaching steel foundation brackets to the affected areas and then hydraulically driving engineered steel tube sections through these brackets until reaching stable, load-bearing soil deep underground. This meticulously planned procedure ensured that the house would receive the necessary stabilization from the roots up. On completion, not only did the Push Pier System halt any further foundational settlement, but it also promoted a re-alignment of windows and doors, significantly closing the pre-existing cracks. Thanks to this intervention, the home’s structural stability has been reinforced, helping the homeowner retain property value, regain quality of life, and achieve peace of mind. Our commitment to providing reliable, long-term solutions exemplifies the ethos that Legacy Supportworks consistently upholds.

In Midland, TX, we recently addressed a homeowner's concerns when their residence began showing troubling signs—cracking in the walls, separation in exterior brick, and sticking doors and windows, all indicative of a settling foundation. Understanding the importance of a reliable and long-lasting solution, they reached out to us at Legacy Supportworks for assistance. Upon receiving their inquiry, our Customer Care Specialist promptly scheduled an inspection. A System Design Specialist from our team visited the property and conducted a thorough evaluation. They determined the best solution to counteract the foundation's settlement was through our Push Pier System. This innovative system provides a permanent stabilization by driving steel tube sections through foundation brackets down to stable, load-bearing soil or bedrock, allowing for potential re-leveling of the structure. Our skilled production team took over to execute the resolution. Led by a competent foreman, our installers efficiently installed the engineered steel piers at strategic locations around the home. This meticulous process ensured that the foundation received uniform support and remained stabilized against any future soil instability. Each pier was tested for maximum capacity load before being locked into place. The outcome was remarkable. Post-installation, not only were the immediate structural concerns of the homeowner alleviated, but there was also noticeable improvement in the closing function of doors and windows, and the cracks in the walls began closing. The stabilization of their foundation not only restored peace of mind but also helped in regaining property value. Another successful foundation repair, reinforcing our commitment to providing unparalleled service and enduring solutions.

Recently, a homeowner in Midland, TX reached out to us due to significant concerns involving their crawl space. The owner, preparing for future home remodeling, noticed an increasing issue—a crack in their master bathroom tile. Concerned about the integrity of their home's foundation impacting their future plans, they sought our expertise. Upon initial contact with our Customer Care Specialist, an appointment was swiftly scheduled for a home inspection. A System Design Specialist from our sales team visited the property, performing a thorough review of the crawl space. They discovered the need for reinforcement under the floors to not only address current issues but also to future-proof the owner's home improvement ambitions. Our solution involved the installation of two critically effective systems: PolyLevel® and SmartJack®. First, our dedicated production team set to work with the PolyLevel® system. Drilling small, pea-sized holes through the affected slabs allowed the injection of high-strength polyurethane foam. This foam expanded, filling voids and carefully lifting the uneven concrete back to its original position. This cured foam ensured that the foundation would remain reliable long-term. Next, by implementing the SmartJack® system, we addressed the underlying structural deficiencies. Using galvanized steel columns carefully cut to the necessary length and placed on a solid steel base, this system was secured to the home's existing floor joists. Our use of heavy-duty threaded rods enabled precise adjustments, raising the pre-existing sagging joists to their proper positions. Through accurate execution and coordination, the outcome was remarkable. The crawl space became robust, capable of supporting future stability, reinforcing reconstruction ambitions without jeopardizing the structure above. As a result, our work restored the homeowner's confidence in their foundation's integrity-long term, paving the way for future remodels. At Legacy Supportworks, we deliver reliable solutions, ensuring our customer's homes stand ready for the future.

A homeowner in Midland faced a distressing problem: one part of her home was noticeably sinking. After replacing all the plumbing under the perception of leaks— only to find none—she realized a deeper issue laid with her foundation. Initially seeking help from another foundation repair company to fill any gaps with foam, she discovered the existing mesh within her concrete slab rendered their method ineffective. The homeowner then turned to us at Legacy Supportworks. Guided by our systematic approach, our seasoned Customer Care Specialist promptly scheduled a home inspection. Upon evaluation, our expert System Design Specialist diagnosed the situation and proposed a straightforward yet effective solution: installing PolyLevel®. PolyLevel® worked perfectly for this scenario. Our skilled production team, including an experienced foreman and diligent installers, prepared the job site for installation. Pea-sized holes were meticulously drilled into the affected slab, ensuring space remained structurally intact for the injection of polyurethane foam. As the foam was distributed beneath the concrete, it gradually expanded, effortlessly lifting the faulty slab back to its intended position. The outcome was clear. The homeowner was relieved to find her once sinking home stable and secure again. Our method didn't require disruptive excavation, preserving the rest of the property while providing a lasting foundation solution. Moreover, this project aligned with our company's mission by delivering a reliable solution and remarkable experience from discovery to completion, affirming the trustworthiness and expertise that encapsulate Legacy Supportworks.

In Plainview, a homeowner's rental property needed urgent attention. The home's rear garage, with its living quarters above, faced a precarious situation: it was teetering on the verge of collapse, and leaning dangerously to one side. The existing support structure was compromised with rotting wood, and it sat vuln rvthat had only dirt underneath. Faced with significant safety concerns and potential property damage, the homeowner reached out to us at Legacy Supportworks for a reliable solution. Our comprehensive process began with a Customer Care Specialist coordinating an inspection by one of our System Design Specialists. Upon a thorough examination, it became evident that immediate reinforcement was essential to stabilize and secure the deteriorating structure. We recommended and agreed upon the installation of the SmartJack® Crawl Space Stabilizer—a proven and durable solution geared towards these circumstances. Our production team, led by a skilled foreman, initiated the stabilization process. First, we prepared a solid base of engineered fill—capable of adequately distributing the home's structure weight—to address the weak foundation soils. Galvanized steel columns from the SmartJack® system were methodically cut to the required length and secured to a 12-inch steel base, expertly bridging the gap between integrity and stability. These adjustable SmartJacks®, with heavy-duty threaded rods, enabled efficient readjustment and minimal disruption, effectively lifting the sagging structure back towards its original posture. The transformation was notable. Post-installation, the garage and its overlying accommodation area showcased revitalized support and structural integrity, mitigating risks and providing a safe living environment. Our efforts conclusively ensured a stable framework for the homeowner, aligning perfectly with our mission to deliver remarkable customer experiences and reliable, long-lasting home solutions.

At Legacy Supportworks, we recently tackled a pressing foundation repair for a homeowner in Midland, TX, who noticed some unsettling signs around their property. The homeowner reached out to us after discovering a visible lean in the front corner of their home, along with stress fractures that were widening in their garage and a staircase with brick breakage, making it clear that the structural integrity of their home was compromised. Understanding the gravity of the situation, our Customer Care team promptly scheduled a home inspection appointment. Upon arrival, one of the expert System Design Specialists from our Sales Team conducted a thorough inspection to assess the extent of the damage. After diagnosing the problem, we recommended the installation of Push Piers, an effective solution designed to address and rectify the foundational issues at hand. Our production team, led by a skilled foreman and supported by our diligent installers, then took over the task. They perfectly executed the installation of Push Piers, working with precision and care to ensure the home’s foundation was not only stabilized but also restored to its original position as closely as possible. Throughout the process, our team prioritized efficiency and cleanliness, making sure the homeowner's property was respected and left in perfect condition afterward. The outcome was a resounding success. The homeowner was relieved to find their house finally relieved from the stresses that threatened its structural soundness. The visible lean, stress fractures, and brick breakage of the staircase were all effectively mitigated, providing a lasting solution to a potentially dangerous problem. This repair not only restored the homeowner's peace of mind but also reaffirmed our mission at Legacy Supportworks: to deliver a remarkable customer experience through reliable, long-lasting solutions for their home's troubles.

At Legacy Supportworks, we recently had the opportunity to provide a durable solution to a homeowner in Midland, TX facing troubling foundation issues. The homeowner was distressed by the sight of interior corners on doorways cracked from floor to ceiling and the unsettling appearance of cracking tiles. Beyond just being an eyesore, these were clear signs the house was settling dangerously - a problem that no one should have to live with. Once the homeowner reached out, our experienced Customer Care team was quick to schedule a meticulous home inspection appointment. Following this, a specialist from our Sales Team assessed the situation thoroughly and diagnosed the underlying cause. Understanding the need for a robust and lasting fix, we recommended installing Push Piers - our go-to reliability for stopping foundation settlement in its tracks. Our dedication didn’t stop at just recommending a solution. Our proficient production team, comprising an expert foreman and skilled installers, moved in to bring our plan to fruition. By strategically positioning and driving the push piers deep into the stable soil strata beneath the home, we precisely countered the unsettling forces acting on the foundation. This process not only provided the necessary lift to reposition the home but steady support to prevent future settlement issues. Once the job was done, a final check ensured that leave the home looked just as neat as when we arrived, with the only difference being its significantly more stable foundation. The homeowner was relieved, to say the least. Cracked doorways and unsettling floors were now a thing of the past, and the dread of potential structural failures dissipated. To us at Legacy Supportworks, this is the essence of what we do – providing not just solutions but the peace of mind that comes with a home standing on solid ground.