Legacy Supportworks serving Ovalo, TX

In Ovalo, TX, a concerned homeowner reached out to Legacy Supportworks due to visible structural issues in her home, including cracks in the back door, hallway, and bedroom areas. Understanding the urgency of the situation, our Customer Care Specialist promptly scheduled a home inspection. One of our System Design Specialists performed a comprehensive inspection to pinpoint the root cause of the home’s structural problems. After a detailed analysis, the problem was found to be inadequate structural support in the crawl space, causing shifts in the home’s framework. To address these issues, we proposed the installation of our reliable SmartJack® System. This cutting-edge solution is designed to stabilize the crawl space beams and floor joists, effectively lifting the floor closer to its original elevation and minimizing instability caused by weakened joists or extensive spans. Our skilled production team then executed the installation. First, galvanized steel columns were cut precisely to fit the space's measurements and set on a solid 12-inch steel base. These columns were attached to the home’s existing girders with adjustable top brackets, allowing our team to skillfully adjust and elevate the sagging floors above the crawl space. Applying engineered fill under the system ensured even weight distribution, reinforcing the home's foundation integrity. By project's completion, the homeowner experienced a visible transformation. The structural stability was restored, eliminating the cracks throughout the home, providing her with peace of mind. Our solution not only enhanced her property's safety but also extended the lifespan of her home's foundation in Ovalo, TX. At Legacy Supportworks, we pride ourselves on delivering remarkable customer experiences and robust, long-lasting home solutions.

In Ovalo, TX, a homeowner faced a significant issue with their uneven concrete slab that had started to sink noticeably, causing concerns about safety and appearance. This problem needed immediate attention to prevent further damage and potential liability. The homeowner contacted our Legacy Supportworks Customer Care Specialist, who promptly scheduled an inspection. Upon arrival, our System Design Specialist conducted a thorough evaluation of the problem. The sunken slab clearly required a reliable and efficient solution to restore it to its original state. Given the circumstances, we recommended the use of our PolyLevel® system—an advanced technology designed to stabilize, lift, and level uneven concrete slabs efficiently. Our production team, led by an experienced foreman, undertook the remedial work. Small, strategic holes were drilled into the affected slab to inject high-strength polyurethane foam beneath the concrete. This innovative approach allowed the foam to expand and cure, lifting the sunken slab precisely back into position. The use of PolyLevel® ensured minimal disruption, and the process was both time-efficient and effective. Completion of the project not only restored the slab's original condition but also enhanced the safety and appearance of the home. The quick cure time of the foam meant the area was ready for use shortly after, demonstrating our commitment to providing reliable, long-lasting solutions. This case in Ovalo exemplifies our dedication to delivering a remarkable customer experience through precision and professionalism.

In Ovalo, TX, a homeowner reached out to us at Legacy Supportworks, expressing concern over potential structural issues with their property. Noticing signs such as cracks in the walls and difficulties with doors and windows closing properly, they understood the urgency of addressing these signs before further damage ensued. Our Customer Care Specialist promptly scheduled an inspection with one of our skilled System Design Specialists. Upon a comprehensive assessment, it became clear that the cause was a settling foundation. Our solution to prevent further issues and secure the home's stability was to implement our Push Pier system. Once the problem was diagnosed, our expert production team, comprising experienced foremen and proficient installers, mobilized to address the issue. Steel brackets were affixed to the home's existing footing, and engineered steel tube sections were installed by hydraulically driving them deep into stable, load-bearing soils or bedrock. This provided immediate reinforcement and support to the foundation. The push piers not only stabilized the foundation and closed cracks but also helped elevate the home toward its original position. Our precise approach ensured minimal disturbance to the homeowner's daily life, and upon completion, our crew left the site as tidy as it was before the work began. The outcome was a noticeably improved structural foundation – the cracks diminished and doors and windows functioned smoothly again. Through our strategic and professional intervention, the homeowner regained property value, peace of mind, and sustained a better quality of living, knowing their home was in reliable hands. At Legacy Supportworks, our dedication to providing long-lasting solutions, such as our foundation repair expertise in handling potential structural failures with our push piers, stands as a testament to our commitment to exceptional service and homeowner trust.