Legacy Supportworks serving Stanton, TX

In Stanton, TX, a homeowner faced a common issue: an uneven back patio. The surface had visible cracks, but the chief concern was its unevenness, which posed a potential safety hazard and compromised aesthetic appeal. Understanding the longevity and reliability issues this could cause, the homeowner decided to seek professional expertise. Our team at Legacy Supportworks ensures that each customer’s journey begins smoothly. After receiving the initial call, our Customer Care Specialist promptly scheduled an inspection by one of our System Design Specialists. Armed with experience and precision tools, the specialist thoroughly assessed the concrete damage. It was then determined that addressing both the elevation and cracking would offer the best long-term solution. We opted for two state-of-the-art products: PolyLevel® and NexusPro®. The PolyLevel® system specializes in stabilizing, lifting, and leveling concrete slabs. During installation, pea-sized holes were strategically drilled into the patio slab, allowing our team to inject high-strength polyurethane foam. This foam expanded underneath, effectively and accurately lifting the patio slab back to a stable and even position. To address the cracks and prevent further water infiltration, NexusPro® Joint Sealant was applied. Known for its resiliency against UV rays and its pliability, NexusPro® effectively seals cracks, enhancing the patio’s durability through all seasons. The result was a transformed, safely leveled patio, free from unsightly and potentially damaging cracks. The homeowner was satisfied with the precision of our methods and the professionalism of our production team. Our commitment to providing a reliable and long-lasting solution was reflected in the outcome of this Stanton project.

A homeowner in Stanton, TX reached out to Legacy Supportworks due to concerns about their driveway. Over time, parts of their driveway had sunk in places, creating uneven surfaces that disrupted drainage and posed a safety risk. Recognizing the importance of addressing these issues promptly, they contacted our Customer Care Specialist, who swiftly scheduled an inspection. Our System Design Specialist visited their home and conducted a thorough evaluation. It was clear that the sunken sections needed to be elevated to align with the expansion joints and ensure proper water runoff. Our recommendation was the use of our specialized services, featuring the PolyLevel® system and NexusPro® Joint Sealant. The following week, our experienced production team arrived on site, skillfully implementing our solution. We began by drilling small, unnoticeable holes into the affected areas of the driveway. Through these accesses, we injected PolyLevel® high-strength polyurethane foam beneath the concrete slabs. This foam expanded strategically, elevating the slabs to their intended height with precision. Once the slabs were realigned and leveled, NexusPro® Joint Sealant was applied to the joints and any visible cracks, creating a robust barrier against water infiltration. The outcome was a transformed driveway, restored to a safe and visually appealing condition. The homeowner was relieved not only by the structural restoration but also by the clean, seamless finish of their driveway, boosting curb appeal. This project underscores our commitment to delivering lasting, reliable solutions with exceptional customer experience.

In Stanton, TX, a homeowner faced a significant issue with their driveway. Over time, a section of concrete had sunk near the garage entry, creating a noticeable lip and causing water to pool towards the garage door—posing a risk of water intrusion. Concerned about potential damage and seeking a reliable solution, they reached out to Legacy Supportworks, experts in concrete repair. Our process began with a consultation from our knowledgeable Customer Care Specialist, who arranged for a comprehensive home inspection. Our System Design Specialist performed a detailed assessment, clearly identifying the problem and recommending a robust solution tailored to resolve the issue effectively. A skilled production team executed the repairs, utilizing state-of-the-art products designed for concrete stabilization and protection. We applied the PolyLevel® system to precisely lift and level the sunken slab using high-strength polyurethane foam. This technique effectively filled voids beneath the concrete and restored its level, ensuring proper water drainage. Next, we sealed the joints and cracks using NexusPro®, a superior joint sealant, preventing further water infiltration which could jeopardize the concrete's stability. Finally, SealantPro® was applied to extend the concrete's lifespan, forming a strong protective bond with the surface to combat wear from water and chemicals. This meticulous approach not only resolved the immediate issue but also fortified the homeowner's driveway against future disruptions. Our commitment to a remarkable customer experience was demonstrated in this seamless repair process, ensuring durable and lasting results.