Experienced Concrete Repair Contractor Servicing Tarzan, TX

A homeowner in Tarzan, TX, recently faced a persistent issue with the sunken concrete around their home, which was causing water to divert towards their foundation. Recognizing the importance of addressing this issue promptly to avoid further structural concerns, they contacted Legacy Supportworks. The customer care process began smoothly as our Customer Care Specialist efficiently scheduled an inspection appointment with our knowledgeable System Design Specialist. Upon thorough inspection, our specialist diagnosed that the primary problem was due to the settling of concrete slabs, which were misdirecting water flow around the property. To provide a stable, precise, and reliable solution, we recommended the use of our PolyLevel system. This method is designed specifically to elevate concrete slabs back to their original position with precision, using high-strength polyurethane foam. Our skilled production team initiated the process by drilling pea-sized holes into the affected slabs. Through these openings, the polyurethane foam was expertly injected beneath the slabs. As the foam expanded and cured, it gradually lifted the concrete back to the desired level, effectively correcting the slope to direct water away from the home's foundation. By utilizing the PolyLevel system, the homeowner achieved a solution that was both effective and durable. Our team's meticulous attention to detail did not end with the repair; they ensured the site was thoroughly cleaned before leaving, leaving no trace of disruption behind. As a result, the homeowner now enjoys enhanced peace of mind, knowing their home is protected against potential water damage with a sturdy and level concrete foundation.

In Tarzan, TX, a homeowner recently reached out to us for expert support concerning an unsettling issue with their home's foundation. Amid renovations, they noticed their floor had begun to drop and the structure appeared to be settling, raising immediate concerns about stability and safety. Upon contacting our Customer Care Specialist, an appointment was swiftly scheduled for a comprehensive home inspection. Soon after, one of our System Design Specialists conducted a thorough evaluation, pinpointing that the underlying issue stemmed from weakened support in the crawl space. The floors above were increasingly showing signs of bounce and sag due to compromised joists. To restore and stabilize the integrity of the homeowner’s structure, our proposal was clear: implement the SmartJack® System. This solution is specifically crafted to address and remedy these types of foundation concerns. Our production team went to work expertly installing galvanized steel columns cut precisely to length. These columns were then strategically set on 12-inch steel bases and fastened securely to the existing girders, complemented by adjustable top brackets for optimum effectiveness. Once the SmartJack® System was installed, the process involved careful adjustments. Heavy-duty threaded rods enabled fine-tuned lifting, gradually raising the floors to approach their original elevation. This integral repair not only redeployed structure stability but significantly reduced floor bounce. The job concluded smoothly, ensuring minimal disturbance to the homeowner’s ongoing renovations. Through professional installation, we delivered a durable and reliable foundation solution, tailored to resolve such residential challenges. Our commitment remains in providing reliable and lasting solutions to protect and maintain our clients’ homes.

In Tarzan, TX, a homeowner noticed the troubling symptoms of foundation distress: small cracks appearing on their door frame trim and drywall. Recognizing the need for a reliable solution, they reached out to Legacy Supportworks for assistance. Understanding the critical nature of foundation issues, our process began with a call to our Customer Care Specialist, who promptly scheduled an inspection. Our System Design Specialist then visited the property, conducted a thorough examination, and identified that the home’s foundation was subject to settling. After a precise diagnosis, we provided the homeowner with our recommended solution—our Push Pier System. The chosen solution involved installing Push Piers to stabilize and lift the foundation back toward its original level. This system works by driving engineered steel tube sections through robust foundation brackets, extending them into deeper, stable layers of soil or bedrock. The process ensures not only stabilization but also the potential uplift of the foundation. Once installation was underway, our experienced production team, consisting of a proficient foreman and skilled installers, diligently executed the project. They implemented the Push Piers with precision, keenly addressing the unstable foundation without disrupting the homeowner's daily life. Upon completion, the homeowner saw a remarkable improvement: the unsettling cracks had minimized significantly, and their doors functioned more smoothly, restoring both the property's value and the homeowner's peace of mind. Our commitment to delivering a stable foundation and a remarkable customer experience was reaffirmed through this successful resolution. At Legacy Supportworks, we continually aim to offer dependable and long-lasting solutions to support families and their homes.